If you’ve got a pile of firewood but nowhere good to stack it, it’s time to fix that. And if you’ve got some old wood lying around—think pallet boards, leftover fencing, or barn scraps—you’ve already got half of what you need. This project is simple, cheap, and gets rid of that wood clutter while giving your firewood a proper home. Let’s build something that looks good and actually works.
What You’ll Need:
-
Reclaimed wood (enough for a base, two sides, and cross supports)
-
Screws or nails
-
Saw (hand saw, circular saw—whatever you’ve got)
-
Drill or hammer
-
Measuring tape
-
Sandpaper (optional, but recommended)
Step 1: Pick Your Wood
Start by digging through your stash of old boards. Look for solid pieces without rot. A mix of 2x4s and flat boards works well, but don’t overthink it. Just make sure they’re not warped or falling apart.
Step 2: Decide the Size
Think about where you’re putting it and how much wood you want to store. For most people, a good starting size is about 2 feet wide, 1.5 feet deep, and 3 feet tall. Big enough to hold a stack but still easy to move if needed.
Step 3: Build the Base
Cut two boards for the sides of the base and two for the front and back. Screw or nail them together into a rectangle. Then add a few slats across the bottom for support so the wood doesn’t sit right on the ground.
Step 4: Add the Side Supports
Use 2x4s or sturdy boards for the side supports. Cut them to your desired height and attach one to each corner of the base, standing straight up. These hold everything in place, so make sure they’re solid.
Step 5: Connect the Top
To keep the sides from wobbling, add a cross piece across the top of each side, like a low fence. You can also run a board across the back to tie everything together and make it sturdier.
Step 6: Sand and Clean Up (Optional but Worth It)
If the wood is rough or full of splinters, hit it with some sandpaper. You don’t have to get fancy—just knock down the sharp edges so it’s safer to handle.
Step 7: Load It Up
That’s it. Slide it where you want it—porch, shed, garage—and start stacking your wood. It’ll keep things neat, dry, and easy to grab when the cold hits.
This isn’t just about firewood. It’s about turning old scrap into something useful. You don’t need a workshop or fancy tools—just a few hours and a little effort. And the best part? Every nick and dent in that reclaimed wood tells a story. Now go enjoy the warmth—your firewood finally has a proper home.