There’s something timeless about a porch swing. It’s where morning coffee tastes better and summer nights feel slower. And the best part? You don’t have to spend a fortune to get one. With a weekend, a few tools, and a little patience, you can build your own cushioned porch swing that’s both sturdy and comfortable.
This guide keeps things simple—no fancy carpentry language, no overpriced materials—just solid steps to help you create something useful and beautiful. Let’s get to it.
What You’ll Need:
Materials:
- 2×4 and 2×6 boards (pressure-treated or cedar)
- Wood screws (2.5” and 3”)
- Wood glue
- Chain or heavy-duty rope (for hanging)
- Eye bolts or swing hangers
- Sandpaper or electric sander
- Exterior wood stain or paint
- Weather-resistant cushions
Tools:
- Drill
- Circular saw or miter saw
- Tape measure
- Level
- Wrench
- Clamps (optional but helpful)
Step 1: Plan the Size of Your Swing
Before you cut anything, decide how wide your swing should be. A good size for two people is around 48–60 inches wide. Add 20 inches for depth, and you’ve got a nice bench-style seat.
Sketch it out. Mark measurements. Triple-check before you cut.
Step 2: Build the Frame
Cut your 2x4s to make a simple rectangle for the seat base. Use wood glue and 2.5” screws to connect the boards. Reinforce the middle with a couple of cross braces so it doesn’t sag over time.
Then cut your backrest pieces—angle them slightly (10–15 degrees) for comfort, or go straight if you want a sharper look. Attach them securely to the back of the base frame.
Step 3: Add Armrests and Slats
Use 2x4s or 2x6s for the arms, depending on the look you’re going for. Make sure they’re level and sturdy.
Next, attach slats to the seat and back. You can space them evenly using a quarter-inch gap between each, or butt them up together for a solid surface. Either way, screw them in tight and sand everything smooth.
Step 4: Sand, Paint, or Stain
Before hanging it up, give the whole swing a good sanding. Smooth edges = no splinters. Then apply a weatherproof finish—either a durable exterior paint or a wood stain with a sealant built in.
Let it dry completely.
Step 5: Install the Hanging Hardware
Drill holes near each corner of the swing seat and insert your eye bolts. Attach chains or ropes securely. Make sure all hardware is rated to hold at least 500 pounds (more if you want peace of mind).
Mount your swing hangers into a strong support beam on the porch—don’t skimp here. Use a level to make sure the swing sits flat, and adjust the chains until it’s hanging about 18–20 inches off the ground.
Step 6: Add Cushions and Enjoy
Grab some outdoor cushions or make your own using weather-resistant fabric and foam. Toss them on, take a seat, and test your handiwork.
Is it comfy? Good. You built it.
A porch swing is more than just a weekend project—it’s a lifestyle upgrade. You made a place to relax, talk, think, or do nothing at all. Whether it’s for sipping iced tea or stargazing, your DIY swing adds a personal touch that no store-bought bench ever could.
Now go enjoy it. You earned this one.