If you’ve pulled up an old carpet and found stubborn glue stuck to your hardwood floors, you’re not alone. Carpet glue can be tough to remove, but you don’t need harsh chemicals or expensive tools to get the job done. With patience and the right techniques, you can restore your hardwood floors to their original beauty. Here’s how.

1. Scrape It Off

Start with the simplest method—scraping. A putty knife or floor scraper can loosen and lift dried glue. Work gently to avoid scratching the wood. If the glue is extra tough, a little heat can make a big difference.

2. Use Heat to Soften the Glue

A hairdryer or heat gun set on low can soften the glue, making it easier to scrape off. Hold the heat source a few inches above the glue, moving it in circles for about 30 seconds. Once the glue softens, scrape it up.

3. Try White Vinegar

White vinegar is a natural, non-toxic way to break down glue. Soak a rag in warm vinegar and lay it over the glue for a few minutes. Then, wipe and scrape the glue away. If needed, repeat the process until the glue is gone.

4. Apply Rubbing Alcohol

Rubbish alcohol works well for stubborn spots. Pour a small amount onto a rag and dab it onto the glue. Let it sit for a few minutes, then scrub gently with a sponge or cloth.

5. Use a Mild Adhesive Remover

If natural methods aren’t enough, a store-bought adhesive remover designed for wood floors can help. Always test it on a small area first to ensure it won’t damage the finish. Follow the instructions, and use a damp cloth to wipe away any residue.

6. Finish with a Gentle Clean

Once the glue is gone, clean your floors with warm water and mild dish soap. Dry thoroughly, and if needed, apply a wood-safe polish to restore shine.

Removing old carpet glue from hardwood floors takes time, but it’s worth the effort. Whether you use heat, vinegar, alcohol, or a scraper, these simple DIY methods can help you reveal the beauty of your wood floors without damage. Give it a try, and enjoy your clean, glue-free floors!