Inside-mount window blinds are a popular choice for homeowners because they offer a sleek and polished look. However, measuring for inside-mount blinds can be tricky, especially if you are not familiar with the process. In this step-by-step guide, we will walk you through the process of measuring for inside-mount window blinds.
Step 1: Gather Your Supplies
Before you start measuring for inside-mount blinds, you will need a few supplies. These include a measuring tape, a pencil, a piece of paper, and a calculator. You will use the measuring tape to measure the width and height of your window, the pencil to mark your measurements on the paper, and the calculator to calculate your final measurements.
Step 2: Measure the Width
Start by measuring the width of your window frame. To do this, measure from the inside of the frame at the top of the window to the inside of the frame at the bottom of the window. Be sure to measure in three different places – at the top, in the middle, and at the bottom – to ensure that the window is square. Record the smallest measurement on your piece of paper.
Step 3: Measure the Height
Next, measure the height of your window frame. To do this, measure from the inside of the frame on the left side of the window to the inside of the frame on the right side of the window. Again, measure in three different places – on the left, in the middle, and on the right – to ensure that the window is square. Record the smallest measurement on your piece of paper.
Step 4: Account for Window Depth
If your window has a deep frame, you will need to account for this when measuring for your blinds. To do this, measure the depth of your window frame from the front of the frame to the window glass. This measurement will determine the depth of the headrail you need for your blinds.
Step 5: Calculate Your Final Measurements
To calculate your final measurements, subtract 1/4 inch from both the width and height measurements you recorded in steps 2 and 3. This will ensure that your blinds fit snugly inside the window frame without rubbing against the frame. If you are using an outside-mount headrail, you will need to add the desired overlap to your final measurements.
Step 6: Double-Check Your Measurements
Before you order your blinds, it’s important to double-check your measurements to ensure accuracy. Make sure that you have recorded the smallest width and height measurements, and that you have accounted for window depth if necessary. It’s always better to double-check your measurements now than to have to return your blinds later.
In conclusion, measuring for inside-mount window blinds may seem daunting at first, but with the right tools and a step-by-step approach, it can be done easily and accurately. By following these six steps, you can ensure that your inside-mount blinds fit perfectly in your window frame and enhance the overall look of your home.