Few things are as frustrating as a door that sticks, won’t close properly, or feels off-kilter. Whether it’s due to humidity, settling foundations, or general wear and tear, a misaligned door can become an everyday annoyance. The good news? You don’t need to be a handyman to fix it! With a few simple tricks, you can get your doors opening and closing smoothly again in no time. Here are some quick fixes to try before calling in a professional.
1. Tighten the Hinges
Over time, screws in the hinges can loosen, causing the door to sag. Grab a screwdriver and check the hinge screws on both the door and the frame. If they’re loose, tighten them up and see if the door realigns. If the screws don’t hold well, try replacing them with longer ones to get a better grip.
2. Check for Paint Buildup
Layers of paint around the edges of the door or frame can cause sticking. Run your hand along the edges to feel for uneven spots. If you find any buildup, use sandpaper or a utility knife to scrape it away carefully.
3. Adjust the Strike Plate
If your door latches incorrectly or not at all, the strike plate might be slightly off. Loosen the screws holding it in place and shift it slightly up or down before tightening them again. In stubborn cases, you might need to file the hole in the plate a bit wider.
4. Sand Down Sticking Spots
If your door rubs against the frame, mark the areas where it sticks with a pencil. Then, remove the door from the hinges and sand down the trouble spots slightly. Reattach the door and test it—repeat if necessary.
5. Weatherproofing and Humidity Control
Doors can expand with humidity. If your problem is seasonal, try running a dehumidifier or using weatherstripping to reduce the impact. For a long-term fix, sealing or painting the door’s edges can help prevent swelling.
A sticky or misaligned door doesn’t have to be a daily frustration. With a few quick adjustments, you can restore smooth operation without spending a fortune. Give these easy fixes a try before reaching for your phone to call in a pro—you might be surprised at how simple the solution is!